Update the Country Code

About this task

If your access point is configured for the World Regulatory domain, it is important to set the country code to the country in which the access point will be deployed to meet regulatory requirements and for optimal wireless operation.

Note

The country code selection is for world models only and is not available to United States (FCC), Canada (CAN), and other country-specific models. Per Federal Communications Commission (FCC) regulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.

Procedure

Power on the access point.
Allow the access point to find and connect to ExtremeCloud IQ.
When the access point is connected, it appears in the table of devices in the Manage > Devices window.
Select the check box next to the access point, and then select Assign Country Code from the Actions drop-down list.
In the dialog box, select the appropriate country from the drop-down list, and then select Save.
Upload your changes to the device.