Status Light Activity

The status light, located between the two Ethernet ports, conveys operational states for system power, firmware updates, Ethernet and wireless interface activity, and major alarms.
Table 1. IQ Engine Status LED Activity
Status Activity
Dark Power is off
Solid white The device power is on and the access point is ready to use. The device has successfully established a Control And Provisioning of Wireless Access Points (CAPWAP) connection to ExtremeCloud IQ and is operating normally
Slow-blinking white The device has a CAPWAP connection to ExtremeCloud IQ, but is operating on 802.3at power instead of 802.3bt power
Solid amber The device power is on and the access point is in boot up mode, or is running without a CAPWAP connection
Slow-blinking amber The device has no CAPWAP connection to ExtremeCloud IQ, and is operating on 802.3at power instead of 802.3bt power
Fast-blinking amber The device is updating its IQ Engine firmware
Table 2. ExtremeWireless WiNG Status LED Activity
Status Activity
Dark Power is off

or

Access point is taken over by the controller. Configuration pushes down to access point from controller to turn off the LED completely

Solid white The device is booting or already taken over by the controller
Slow-blinking white The device is in the process of being taken over by the controller or has failed to be taken over by the controller
Flashing fading white Configuration pushes down to access point from controller helping an user to locate the access point location using visual inspection
Solid amber The access point is upgrading its firmware
Fast-blinking amber The access point is acquiring DHCP IP