Install Fabric using OVA

You can install XCO using OVA.

Before you begin

  • Ensure that you have an understanding of the hypervisor environment, including converting the embedded disk image to a suitable format.
  • The XCO OVA image does not support cloud-init, or provisioning the VM with a user and network information via the user interface. Ensure that you are aware of the information on DNS, network address, subnet mask, and gateway requirements to assign to the VM.
  • DHCP address of the VM is not supported. A static address is required. Ensure that the selected address complies with the general IP address requirements.

About this task

Follow this procedure to install XCO using OVA.

Procedure

  1. Download the OVA file for fabric management to a Linux device. Use the device to convert or transfer the OVA file to your hypervisor image store.
  2. Verify the PGP signature as described in article 48172 on the Extreme Portal.
  3. (Optional) Convert the OVA, and import the image or the OVA into your hypervisor.
  4. Deploy the OVA or converted image.
    When prompted, select virtio or its equivalent on your hypervisor for the drive bus type option for a converted image. If given options are in the form of hardware requirements assigned to the VM, see Server and Cloud VM Requirements.
  5. When the VM is in a running state, complete the procedure described in Post OVA Install Procedure for Fabric and Visibility.