Configuration and Image File Display Commands

Configuration and Image File Management and Display Commands lists configuration and image file display commands for S- K- or 7100-Series devices.

Configuration and Image File Management and Display Commands

Task	Command
Display the index, creation date, and description of the currently configured restore-point. If “(Boot)” is listed after the index entry, this restore-point will be used when the system reboots next.	show config restore-point
Display the firmware image the system will load at the next system reset.	show boot system
List files stored in the file system.	dir [filename]
Display the contents of an image or configuration file.	show file filename
Display the system configuration.	show config [all] [facility]

Refer to the S-, K-, and 7100 Series CLI Reference Guide for a description of the output of each command.