License Overview

S-Series

• Increased port capacity, to 1024 users per S-Series access module or SSA (S-EOS-PPC license)
• Enhanced routing for S-Series S-130 fabric class (S-EOS-L3-S130 license)
• Advanced routing for S-Series S-150 fabric class (S-EOS-L3-S150 license)

K-Series

• Advanced router for K-Series (K-EOS-L3)
• Increased port capacity to 250 users per port and a maximum of 1152 users for the K6-Chassis and 1920 users for the K10-Chassis (K-EOS-PPC license)

7100-Series

• Advanced router for 7100-Series:
  • 71A-EOS-ADVL3 – 7100K-Series Advanced Routing license
  • 71A-EOS-G-ADVL3 – 7100G-Series Advanced Routing license

You must activate the purchased license key.

The S-EOS-L3-S130 license is required to run VRF on the S130 class of fabrics or in the S3 chassis with S130 class I/O module installed. In a mixed chassis of S150 and S130 Fabrics, the feature entitlement will revert to the S130 feature set and therefore a license would be required to run VRF in this mixed environment.

The S-EOS-L3-S150 license is not currently available. This license is reserved for future routing enhancements on the S150 class of fabrics.

The license is activated on an S- K- or 7100-Series module or chassis, as applicable, by using the set license command in any command mode to specify the license type and the ASCII advanced licensing key.

Use the show license command in any command mode to display the license key once you have activated the license.