RFC 5601 (PW-STD-MIB)

pwTable

pwIndex

A unique index for the conceptual row identifying a PW within this table.

pwPeerAddr

This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object should contain a value of all zeroes if not applicable (pwPeerAddrType is 'unknown').

pwID

Pseudowire identifier. If the pwOwner object is pwIdFecSignaling or l2tpControlProtocol, then this object is signaled in the outgoing PW ID field within the Virtual Circuit FEC Element. For other values of pwOwner, this object is not signaled and it can be set to zero.

pwLocalCapabAdvert

If a maintenance protocol is used, it indicates the capabilities the local node will advertise to the peer.

pwRemoteGroupID

This object is obtained from the Group ID field as received through the maintenance protocol used for PW setup. Value of zero is reported if not used. Value of 0xFFFFFFFF is used if the object is yet to be defined by the PW maintenance protocol.

pwOutboundLabel

The PW label used in the outbound direction (i.e., toward the PSN). It might be set manually if pwOwner is 'manual'; otherwise, it is set automatically.

pwInboundLabel

The PW label used in the inbound direction (i.e., packets received from the PSN). It may be set manually if pwOwner is 'manual'; otherwise, it is set automatically.

pwCreateTime

The value of sysUpTime at the time this PW was created.

pwUpTime

Specifies the time since last change of pwOperStatus to Up (1).

pwLastChange

The value of sysUpTime at the time the PW entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.

pwAdminStatus

The desired operational status of this PW. This object can be set at any time.

pwOperStatus

This object indicates the operational status of the PW; it does not reflect the status of the Customer Edge (CE) bound interface.

pwLocalStatus

Indicates the status of the PW in the local node.

pwRemoteStatus

Indicates the status of the PW as was advertised by the remote.

pwRowStatus

For creating, modifying, and deleting this row. This object can be changed at any time.

pwOamEnable

This variable indicates if OAM is enabled for this PW. It can be changed at any time.

pwIndexMappingTable

All objects

This table enables the reverse mapping of the unique PWid parameters [peer IP, PW type, and PW ID] and the pwIndex. The table is not applicable for PWs created manually or by using the generalized FEC.