Enables an insight interface on connector.
An insight interface is not enabled.
Hardware configuration mode for a connector
This command is required to enable an insight interface for a port-channel.
Use the no form of this command to disable the insight interface.
This example enables an insight interface on a connector.
device# configure terminal device(config)# hardware device(config-hardware)# device(config-hardware)# connector 0/48 device(config-connector-0/48)# insight mode
This example uses the insight enable command to enable an insight interface on a port-channel.
device# configure terminal device(config)# interface port-channel 22 device(config-Port-channel-22)# insight enable