show tunnel

Displays information pertaining to a tunnel interface.

Syntax

show tunnel tunnel-id

Parameters

tunnel-id: Specifies the tunnel ID.

Modes

Privileged EXEC Mode

Examples

This example displays tunnel information.

device# show tunnel 10
Tunnel 10, mode GRE
Ifindex 0x7c40000a, Admin state up, Oper state up
Source IP 14.101.0.4, Vrf default-vrf
Destination IP 15.10.0.3
Tunnel IP Interface : Ve 501 up    
Tunnel TTL 255      Tunnel DSCP 0 
Tunnel QosMode PIPE 
Keepalive Interval 10000  RetryCount 3 TimeRemaining 27861 msecs
GRE Keep Alive : RX 62      TX 62

Active next hops:
    IP: 13.10.0.3, Vrf: default-vrf
    Egress L3 port: Ve 10, Outer SMAC: 609c.9f0d.4a14
    Outer DMAC: 001b.ed9f.1700
    Egress L2 Port: Unknown, Outer ctag: 0, stag:0, Egress mode: Local
    BUM forwarder: no