Displays detailed Bidirectional Forwarding Detection (BFD) neighbor information.
Privileged EXEC mode
The show bfd neighbors details command displays the following information:
Output field | Description |
---|---|
OurAddr |
Specifies the source IP address of the interface on which this BFD session is running. |
NeighAddr |
Specifies the IPv4 address of the remote neighbor. |
State |
Specifies the current state of the BFD session:
|
Int |
Specifies the interface on which the BFD session is running. |
Local: |
|
State |
State of the local device. |
Diag |
Value of the diagnostic field in the BFD control message as used by the device in the last message sent. |
Demand mode |
Value of the demand in the BFD control message as used by the device in the last message received. |
Poll |
Value of the poll in the BFD control message as used by the device in the last message sent or received. |
Received |
|
State |
State of the remote device. |
Diag |
Value of the diagnostic field in the BFD control message as used by the device in the last message received. |
Demand mode |
Value of the demand in the BFD control message as used by the device in the last message received. |
Poll |
Value of the poll in the BFD control message as used by the device in the last message received. |
Final |
Value of the final bit in the BFD control message as used by the device in the last message received. |
Local |
The local device |
MinTxInt(ms) |
The interval in milliseconds between which the device will send a BFD message from this local neighbor port to its peer. |
MinRxIntMinTxInt(ms) |
The interval in milliseconds that the neighbor device waits to receive a BFD message from its peer on this local port. |
Multiplier |
The number of times that the neighbor device will wait for the MinRxInterval time on this port before it determines that its peer device is nonoperational. |
Received |
|
MinTxInt(ms) |
The interval in milliseconds between which the device will send a BFD message from the remote neighbor port to its peer. |
MinRxIntMinTxInt(ms) |
The interval in milliseconds that the neighbor device waits to receive a BFD message from its peer on this remote port. |
Multiplier |
The number of times that the remote neighbor device will wait for the MinRxInterval time on this port before it determines that its peer device is nonoperational. |
Rx Count |
Total number of BFD control messages received from the remote peer. |
Tx Count |
Total number of BFD control messages sent to the remote peer. |
LD/RD |
Local and remote descriptor |
Heard from Remote |
Indicates remote BFD neighbor has been heard. |
Current Registered Protocols |
Specifies the protocols that are registered for the particular session. |
Uptime |
The amount of time the BFD session has been in the up state. |