Before you begin
Note
The
ExtremeCloud IQ
Controller E3125 must be upgraded to the latest
ExtremeCloud IQ firmware before installing the controller on the
network.
You will need a laptop.
About this task
You can retain the default IP address of the controller management interface if you
do not connect the controller to your enterprise network. If you connect the
controller to your network, follow these steps:
Procedure
-
Connect a laptop to the
controller's management port.
-
Configure the Ethernet port of
the laptop.
Use a statically assigned unused IP address in the 192.168.10.0/24
subnet.
-
Enter https://192.168.10.1:5825 into a web browser address bar.
192.168.10.1
is the default IP address on the controller management port.
The ExtremeCloud IQ logon screen
displays.
-
Log on the ExtremeCloud IQ.
The default user name is
admin and
the default password is abc123
-
Complete the installation to
configure the E3125 controller for new deployments.
-
Disconnect your laptop from the
controller.
-
Connect the controller
management port to the enterprise Ethernet LAN.
-
Log on to Extreme Networks.
