Install a Transceiver or an Adapter

Before you begin

Attach an antistatic wrist strap to your wrist.

Data ports 3 and 4 support QSFP28 that can be used with 50Gbps or 100Gbps transceivers, and 10 and 25 Gbps transceivers with an adapter.

Table 1. Data Ports 3 and 4 specifications
Callout	Port
1	Port 3 (Data Port 3) 10/25/50/100GbE, QSFP28
2	Port 4 (Data Port 4) 10/25/50/100GbE, QSFP28

Remove the transceiver from its packaging.
If there is a protective dust cover on the transceiver connector, do not remove it yet. Remove the cover when you connect a cable.
Hold the transceiver so that the connector seats properly.
Carefully align the transceiver with the port slot.
Push the transceiver into the port slot until it clicks and locks into place.