Remove the Faceplate

Before you begin

You need:
  • A #2 Philips screwdriver
  • A flathead screwdriver

About this task

Remove the front faceplate if you need to access the front ports. The front video connector and USB ports are also available on the rear of the controller.

Click to expand in new window
Faceplate removal
Faceplate removal. From left to right: 1. Bracket. 2.Philips screws.
Table 1. Faceplate components
Callout Description
1 Bracket or rack ear
2 Philips screws

Procedure

  1. Loosen and remove the two Phillips screws that hold the holding the rack ears on one end of the controller.
  2. Remove the bracket or rack ears.
  3. Repeat steps 1-2 for the other side.
  4. Use the flathead screwdriver and gently slide the faceplate forward and off of the two retaining pins.
  5. Reconnect the rack ears and screws to the controller.
9037856-00 Rev AA