show ip vrrp address

ADV

Indicates the Advertisement Interval, in seconds, between sending advertisement messages.

BACKUP MASTER

Indicates if the Backup-Master feature is disabled or enabled.

BACKUP MASTER STATE

Indicates if the Backup-Master is up. If the switch is in Master state but Backup-Master is enabled, then the BACKUP MASTER STATE will be down.

CONTROL

Indicates the virtual router function. Configure the value to enabled to transition the state of the router from initialize to backup. Configure the value to disabled to transition the router from master or backup to initialize.

CRITICAL IP

Indicates the IP address of the interface that is critical to VRRP. If that IP interface is down, the VRRP state will transition to Backup, even if it has higher priority.

CRITICAL IP (ENABLED)

Indicates if the critical IP feature is enabled.

FAST ADV

Indicates the Fast Advertisement Interval, in milliseconds, between sending advertisement messages. When the Fast Advertisement Interval is enabled, the Fast Advertisement Interval is used instead of the regular advertisement interval.

FAST ADV (ENABLED)

Indicates the state of fast advertisement.

HLD DWN

Specifies the time interval (in seconds) the Hold-down timer has until it expires. If the value is 0, it means the Hold-down timer is not running. This timer will delay the transition from Backup to Master only on a system startup (the VRRP comes from INIT to Backup and determines it should become Master).

• The VRRP hold-down timer runs when the system transitions from initialization to backup to master. This occurs only on a system startup

• The VRRP hold-down timer does not run under the following condition: In a nonstartup condition, the backup system becomes master after the Master Downtime Interval (3 * hello interval), if the master virtual router goes down

• The VRRP hold-down timer also applies to the VRRP BackupMaster feature

HOSTNAME

Displays the SPBM host name of the VRRP primary router for a Distributed Virtual Routing (DvR) interface.

IP

Indicates the assigned IP addresses that a virtual router backs up.

MAC

Indicates the virtual MAC address of the virtual router in the format 00-00-5E-00-01-<vrrpid>, where the first three octets consist of the IANA OUI; the next two octets indicate the address block of the VRRP protocol; and the remaining octets consist of the vrrpid.

MASTER

Indicates the master router real (primary) IP address.

ORIGIN

Displays how the VRRP interface was configured, either manually or via DvR.

PRIO

Indicates the priority for the virtual router with respect to other virtual routers that are backing up one or more associated IP addresses. Higher values indicate higher priority.

A priority of 255 cannot be configured and it is set for the VRRP router that has the same IP as the physical IP addresses (is Address Owner).

P/V

Indicates the P(ort)/V(lan) on which the VRRP was configured.

STATE

Indicates the current state of the virtual router.

initialize—waiting for a startup event

backup—monitoring the state or availability of the master router

master—forwarding IP addresses associated with this virtual router.

UP TIME

Indicates the time interval since this virtual router exited the INIT state.

VRRP ID

Indicates the virtual router ID on a VRRP router.

VERSION

Indicates the VRRP version.