Displays the IPsec encryption statistics on the Fabric IPsec Gateway Virtual Machine (VM).
show ipsec-stats
Fabric IPsec Gateway Configuration
This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine Feature Support Matrix.
The following example displays the IPsec encryption statistics on the Fabric IPsec Gateway VM:
Switch:1> enable
Switch:1# virtual-service figw console
Connected to domain figw
Escape character is ^Y
<cr>
FIGW> show ipsec-stats
src 192.0.2.30 dst 192.0.2.40
proto esp spi 0xc0c2d9cd(3233995213) reqid 1(0x00000001) mode tunnel
replay-window 32 seq 0x00000000 flag af-unspec (0x00100000)
aead rfc4106(gcm(aes)) 0xa9c1923a4b4c5618ea2f3596de821261218bdea2 (160 bits) 128
anti-replay context: seq 0x0, oseq 0x138, bitmap 0x00000000
lifetime config:
limit: soft (INF)(bytes), hard (INF)(bytes)
limit: soft (INF)(packets), hard (INF)(packets)
expire add: soft 3268(sec), hard 3600(sec)
expire use: soft 0(sec), hard 0(sec)
lifetime current:
475650(bytes), 312(packets)
add <<yyyy-mm-dd>> <<hh:mm:ss>> use <<yyyy-mm-dd>> <<hh:mm:ss>>
stats:
replay-window 0 replay 0 failed 0
src 192.0.2.40 dst 192.0.2.30
proto esp spi 0xc92b08e5(3375040741) reqid 1(0x00000001) mode tunnel
replay-window 32 seq 0x00000000 flag af-unspec (0x00100000)
aead rfc4106(gcm(aes)) 0x9ca3568095298cefaaa709b9b932eb5141bd252c (160 bits) 128
anti-replay context: seq 0x135, oseq 0x0, bitmap 0xffffffff
lifetime config:
limit: soft (INF)(bytes), hard (INF)(bytes)
limit: soft (INF)(packets), hard (INF)(packets)
expire add: soft 3341(sec), hard 3600(sec)
expire use: soft 0(sec), hard 0(sec)
lifetime current:
470953(bytes), 309(packets)
add <<yyyy-mm-dd>> <<hh:mm:ss>> use <<yyyy-mm-dd>> <<hh:mm:ss>>
stats:
replay-window 0 replay 0 failed 0