boot config flags advanced-feature-bandwidth-reservation

Syntax

• boot config flags advanced-feature-bandwidth-reservation high

• boot config flags advanced-feature-bandwidth-reservation low

• boot config flags advanced-feature-bandwidth-reservation vim

• default boot config flags advanced-feature-bandwidth-reservation

• no boot config flags advanced-feature-bandwidth-reservation

Command Parameters

high

Reserves the maximum bandwidth for the advanced features. Depending on the hardware platform, the number of reserved ports is different.

low

Reserves less bandwidth to support minimum functionality for advanced features. Depending on the hardware platform, the number of reserved ports is different.

vim

Reserves the internal Versatile Interface Module (VIM) ports as loopback ports.

Default

By default, this boot configuration flag is enabled with the following options:

• low level option for 5320 Series and 5420 Series switches.

• vim level option for 5520 Series switches (if vim port is available and VIM is not installed, else low level option is enabled).

• vim level option for 5720 Series switches (if vim port is available and VIM is not installed, else high level option is enabled).

Command Mode

Global Configuration

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine Feature Support Matrix.

If your switch does not support this boot configuration flag, it is because the hardware reserves the bandwidth automatically with no user interaction.

You must save the configuration and restart the switch for a configuration change to take effect.

You must ensure your configuration does not include reserved ports before you enable this feature. If the configuration includes reserved ports after you enable this feature and restart the switch, the switch aborts loading the configuration.

The vim parameter is only supported on the 5520 Series and 5720 Series.

The high parameter is only supported on the 5720 Series.

The low parameter is not supported on the 5720 Series.