show ip igmp sender

Displays the information about the Internet Group Management Protocol (IGMP) senders.

Syntax

Command Parameters

count
Specifies the number of entries.
group {A.B.C.D}
Specifies the group address.
member-subnet default |{A.B.C.D/X}
Specifies the IP address and network mask.
vrf WORD<1-16>
Specifies a VRF by name.
Note

Note

The VRF name is l3vsn-<l3isid> if added to a DVR leaf. If dynamically created for spb-multicast the VRF name is mvpn-<l3isid>.

vrfids <0-512>
Specifies a VRF by ID.

Default

None

Command Mode

Privileged EXEC

Command Output

The show ip igmp sender command displays the following information:

Output field

Description

GRPADDR

Indicates the IP multicast address.

IFINDEX

Indicates the interface index number.

MEMBER

Indicates the IP address of the host.

PORT/MLT

Indicates the IGMP sender ports.

STATE

Indicates if a sender exists because of an IGMP access filter. Options include filtered and nonfiltered.

L2ISID

Indicates the I-SID associated with the Layer 2 interface.

SCOPEISID

Indicates the scope ID.

DATAISID

Indicates the data I-SID.

Examples

The following example displays information about IGMP senders:

Switch:1# show ip igmp sender
=======================================================================  
		 IGMP Sender - GlobalRouter 
=======================================================================  
                              PORT/                         
GRPADDR   IFINDEX    MEMBER    MLT    STATE      L2ISID SCOPEISID  DATAISID 
---------------------------------------------------------------------------
224.1.1.4  Vlan 10  192.2.0.1  1/18/1  NOTFILTERED   0  10010    16000001 
224.1.1.4  Vlan 10  192.2.0.1  1/18/1  NOTFILTERED   0  10010    16000004 
224.1.1.6  Vlan 10  192.2.0.1  1/18/1  FILTERED      0  10010    16000010 
224.1.1.7  Vlan 10  192.2.0.1  1/18/1  FILTERED      0  10010    16000009 
224.1.1.8  Vlan 10  192.2.0.1  1/18/1  NOTFILTERED   0  10010     210 

5 out of 5 entries displayed

The following example displays information about IGMP senders for a specific VRF:

Switch:1# show ip igmp sender vrf vrf1
=======================================================================  
		 IGMP Sender - VRF vrf1 
=======================================================================  
                              PORT/                         
GRPADDR   IFINDEX    MEMBER    MLT    STATE      L2ISID SCOPEISID  DATAISID 
---------------------------------------------------------------------------
224.1.1.4  Vlan 10  192.2.0.1  1/18/1  NOTFILTERED   0  10010    16000001 
224.1.1.4  Vlan 10  192.2.0.1  1/18/1  NOTFILTERED   0  10010    16000004 
224.1.1.6  Vlan 10  192.2.0.1  1/18/1  FILTERED      0  10010    16000010 
224.1.1.7  Vlan 10  192.2.0.1  1/18/1  FILTERED      0  10010    16000009 
224.1.1.8  Vlan 10  192.2.0.1  1/18/1  NOTFILTERED   0  10010     210 

5 out of 5 entries displayed