show ipv6 bfd

Display global Bidirectional Forwarding Detection (BFD) configuration information for IPv6 interfaces.

Syntax

show ipv6 bfd
show ipv6 bfd vrf
show ipv6 bfd vrfids

Command Parameters

vrf: Specifies a VRF instance by VRF name.
vrfids: Specifies a VRF or range of VRFs by ID.

Command Mode

User EXEC

Usage Guidelines

BFD for IPv6 interfaces is a demonstration feature on some products. For more information about feature support, see Fabric Engine Feature Support Matrix.

Command Output

The show ipv6 bfd command displays the following information:


Output field	Description
BFD Version	Specifies the current BFD version.
Admin Status	Specifies whether BFD is enabled globally.
Trap Enable	Specifies whether traps are enabled.
Total session number	Specifies the total number of BFD sessions.
UP	Specifies whether a BFD session is in UP state.
DOWN	Specifies whether a BFD session is in DOWN state.
AdminDown	Specifies whether a BFD session is in AdminDown state.
Init	Specifies whether a BFD session is in Init state.

Example

The following example displays global configuration information for BFD on an IPv6 interface.

Switch:1>show ipv6 bfd
================================================================================
                         BFD information - GlobalRouter
================================================================================
                      BFD Version :  1
                     Admin Status :  TRUE
                      Trap Enable :  FALSE
--------------------------------------------------------------------------------
   Total session number :  1

    UP: 0, DOWN: 1, AdminDown: 0, Init: 0
--------------------------------------------------------------------------------