show sys software

Verify that the image and configuration are loaded properly.

Syntax

Default

None

Command Mode

User EXEC

Command Output

The show sys software command displays the following information:

Output field

Description

Default Runtime Config File

Displays the default Run-time configuration file directory name.

Config File

Displays the name of a new configuration file.

Last Runtime Config Save

Displays the last run-time configuration saved.

Version

Displays the software version information.

PrimaryConfigSource

Displays the primary boot configuration file.

SecondaryConfigSource

Displays the secondary boot configuration file.

EnableFactoryDefaults

Displays if the switch will bypass the loading of the switch configuration file and load the factory defaults.

EnableDebugMode

Displays if the switch debugs the configuration file during loading configuration at system boot.

EnableRebootOnError

Displays if the switch automatically reboots on a fatal error.

EnableTelnetServer

Displays if the Telnet server is enabled.

EnableFtpServer

Displays if the FTP server is enabled.

EnableTftpServer

Displays if the TFTP server is enabled.

Example

The following example displays output from the show sys software command.

Switch:1#show sys software

System Software Info :

Default Runtime Config File : /intflash/config.cfg
Config File :
Last Runtime Config Save : 0

Boot Config Table
Version : Build 9.0.0.0 (GA) on Mon Oct 30 18:04:13 EDT 2023
PrimaryConfigSource : /intflash/config.cfg
SecondaryConfigSource : /intflash/config.cfg
EnableFactoryDefaults : false
EnableDebugMode : false
EnableRebootOnError : true
EnableTelnetServer : true
EnableFtpServer : true
EnableTftpServer : false