tftp boot-file-name

Syntax

• tftp boot-file-name WORD<0-128>

• no tftp boot-file-name

Command Parameters

WORD<0-128>

Specifies the file name of the TFTP boot image that you want to assign to the subnet.

Default

None

Command Mode

DHCP Server Subnet Configuration

Usage Guidelines

• You must assign a TFTP server IP address before you can assign a boot image file.

• The subnet TFTP boot image that you configure apply to all hosts within the subnet unless there is an overriding TFTP configuration for a specific host.

• Within this subnet, the subnet TFTP boot image overrides any global TFTP boot image for DHCP Server. However, if you don't assign a subnet boot image, the global setting, if it exists, applies to this subnet.