link-debounce

Syntax

• default link-debounce

• link-debounce <0-300000>

• no link-debounce

Command Parameters

<0-300000>

Specifies the Link Debounce time threshold in milliseconds.

Default

The default status is disabled for all ports when not initially configured. If you run the default link-debounce command, the default configuration is enabled with a value of 1,000 milliseconds. To return to the initial disabled state, you must run the no link-debounce command or set the Link Debounce timer to 0.

Command Mode

GigabitEthernet Configuration.