tacacs server host

Syntax

• default tacacs server {A.B.C.D}

• default tacacs server {A.B.C.D} port

• default tacacs server {A.B.C.D} single-connection

• default tacacs server {A.B.C.D} timeout

• no tacacs server {A.B.C.D}

• no tacacs server {A.B.C.D} single-connection

• tacacs server host {A.B.C.D}

• tacacs server host {A.B.C.D} key WORD<0-128>

• tacacs server host {A.B.C.D} port <1-65535>

• tacacs server host {A.B.C.D} single-connection

• tacacs server host {A.B.C.D} timeout <10-30>

Command Parameters

{A.B.C.D}

Specifies the IP address of the primary TACACS+ server.

Key WORD<0-128>

Configures the secret key to share with this TACACS+ server. If the key length is zero, that indicates no encryption is used.

port <1-65535>

Configures the TCP port on which the client establishes a connection to the server. A value of 0 indicates that the system specified default value is used. The default is 49.

single-connection

Specifies if the TCP connection between the device and the TACACS+ server is a single connection. If you do not enable the single-connection parameter, the system uses the default connection type that opens and closes a connection for each communication session.

timeout <10-30>

Configures the maximum time, in seconds, to wait for this TACACS+ server to reply. The default is 10 seconds.

Default

None

Command Mode

Global Configuration