ip dhcp-server ntp-servers

Syntax

• ip dhcp-server ntp-servers {A.B.C.D} […]

• no ip dhcp-server ntp-servers [A.B.C.D]

Command Parameters

{A.B.C.D}

The IPv4 address of the NTP server. You can enter up to eight server addresses with this command. Enter each IP address on the same command line with a space between each address.

Default

None

Command Mode

Global Configuration

Usage Guidelines

The NTP server assignments apply to each DHCP subnet that DHCP Server services unless there is an overriding NTP server configuration within the subnet.