sflow collector

Syntax

• default sflow collector <1-2>

• default sflow collector <1-2> port

• default sflow collector <1-2> timeout

• no sflow collector <1-2>

• no sflow collector <1-2> address {A.B.C.D}

• no sflow collector <1-2> owner WORD<1-20>

• sflow collector <1-2>

• sflow collector <1-2> address {A.B.C.D}

• sflow collector <1-2> owner WORD<1-20>

• sflow collector <1-2> port <1-65535>

• sflow collector <1-2> timeout <1-65535>

Command Parameters

<1-2>

Specifies the ID to export sFlow datagrams to the collector ID.

address {A.B.C.D}

Specifies the collector IP address.

owner WORD<1–20>

Specifies the sFlow collector name.

port <1–65535>

Specifies the destination UDP port. The default port is 6343.

timeout <1–65535>

Specifies the time remaining (in seconds) before the collector is released. The default is 0, which means you are not using the collector.

Default

None

Command Mode

Global Configuration