show interfaces gigabitethernet error

Show general error information for the port.

Syntax

Command Parameters

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

collision
Show port collision error information.
ospf
Show port ospf error information.
verbose
Show port error information. Display priority-based flow control pause transmit and receive counter.

Default

None

Command Mode

Privileged EXEC

Command Output

The show interfaces gigabitethernet error ospf command displays the following information:

Output field

Description

PORT NUM

Indicates the port number.

VERSION MISMATCH

Indicates the number of version mismatches this interface receives.

AREA MISMATCH

Indicates the number of area mismatches this interface receives.

AUTHTYPEMISMATCH

Indicates the number of AuthType mismatches this interface receives.

AUTH FAILURES

Indicates the number of authentication failures.

NET_MASK MISMATCH

Indicates the number of net mask mismatches this interface receives.

HELLOINT MISMATCH

Indicates the number of hello interval mismatches this interface receives.

DEADINT MISMATCH

Indicates the number of dead interval mismatches this interface receives.

OPTION MISMATCH

Indicates the number of options mismatches this interface receives.