monitor-by-isid

Create or modify a monitor based on the I-SID entry.

Syntax

default monitor-by-isid <1–1000> enable
monitor-by-isid <1–1000> egress-mlt <1–512>
monitor-by-isid <1–1000> egress-ports {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
monitor-by-isid <1–1000> enable
monitor-by-isid <1–1000> map-to-vid <1–4093>
monitor-by-isid <1–1000> monitor-isid-offset <1-1000> {egress-mlt <1–512> egress-ports {slot/port[/sub-port][-slot/port[/sub-port]][,...]} map-to-vid <1–4093>}
no monitor-by-isid <1–1000> egress-mlt
no monitor-by-isid <1–1000> egress-ports
no monitor-by-isid <1–1000> enable
no monitor-by-isid <1–1000> map-to-vid

<1-1000>: Specifies the session ID.
egress-mlt <1-512>: Specifies the MLT to which the analyzers connect.
egress-ports {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Specifies the port to which the analyzers connect.
Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
enable: Enables monitoring for the specific I-SID entry.
map-to-vid <1-4093>: Maps the mirrored packet to a specified VLAN ID for analysis. This parameter is optional.
Note

If you use the Extreme Integrated Application Hosting (IAH) port 1/s1 as the analyzer port on the monitoring BEB for remote mirroring, you must associate it to VLAN ID 4091.
monitor-isid-offset <1-1000>: Specifies the offset ID that is mapped to the actual monitor I-SID where packets are mirrored. Monitor I-SID = Base monitor I-SID + Offset ID. The base monitor I-SID is 16776000.

None

Global Configuration