show ipv6 mld group

Displays MLD group information

Syntax

Default

None

Command Mode

User EXEC

Command Output

The show ipv6 mld group command displays the following information:

Output field

Description

GRPADDR

Specifies the multicast group address that others want to join to. A group address can be the same for many incoming ports.

MEMBER

Specifies the IP address of a source that has sent group report whishing to join this group.

INPORT

Identifies a physical interface or a logical interface which has received group reports from various sources.

EXPIRATION

Specifies the time left before group report expires on this port. This is updated upon receiving a group report.

Example

The following example displays the MLD group information.

Switch:1#show ipv6 mld group
================================================================================
                           Mld Group - GlobalRouter
================================================================================
GRPADDR/MEMBER                                   INPORT             EXPIRATION 
--------------------------------------------------------------------------------
ff1e:0000:0000:0000:0000:0000:0002:4444/         V666-1/4          0          
2001:0db8:3c4d:0015:0000:0000:1a2f:1a2c

1 out of 1 group Receivers displayed

Total number of unique groups 1 text