Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

operational-mode

Resets a WiNG standalone AP's mode of operation from 'distributed' or 'centralized'.

The WiNG 7.1.X AP5XX (AP505, AP510 and AP560) model access points have the capability of operating in the following two modes: Distributed and Centralized. For a newly-manufactured, out-of-the-box AP5XX access point the mode of operation is not specified.

Note

Note

For more information on the dual modes of operation, see Dual Mode Capability.

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h

Syntax

operational-mode centralized

Parameters

operational-mode centralized

operational-mode centralized

Resets the WiNG standalone AP's mode of operation to:

  • centralized - In the Centralized mode ExtremeWireless AP models AP505i and AP510i adopt to the ExtremeCloud Appliance. A Centralized site topology allows seamless roaming within one geographic location. For more information, please refer to the ExtremeCloud Appliance User Guide available at https://extremenetworks.com/documentation.
Note: After issuing the command, reload the AP for the change to take effect.

Examples

ap505-134038#operational-mode centralized
ap505-134038#reload
The system will be rebooted, do you want to continue? (y/n): y
ap505-134038#
Published September 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page