Configuring Fabric Attach

Static Fabric Attach VLANs are explicitly created by a user. Static VLANs can be mapped to a Network Service Identifier (NSI) or Individual Service Identifier (ISID).

To map a VLAN to an NSI/ISID, use the following command:

configure [{vlan} vlan_name |vlan vlan_id] add [nsi nsi | isid isid]

Mappings created with this command are persistent across reboots, whereas mappings by Fabric Attach clients and mappings requested by RADIUS/Policy/NetLogin are not persistent.

Note

While it is possible to configure an NSI mapping using the command configure virtual-network vn_name vxlan vni [ vni | none], it is not recommended to do so when using Fabric Attach.

To unmap a VLAN from an NSI/ISID, use the following command:

configure [{vlan} vlan_name |vlan vlan_id] delete [nsi nsi | isid isid]

To display VLAN to NSI/ISID information, use the following command:

show [{vlan} vlan_name | vlan {vlan_id}] fabric attach mappings

To display a list of known fabric attach elements information, use the following command: