The AVB feature (including AVB, gPTP and MSRP commands) requires the AVB Feature Pack. MRP and MVRP do not require the AVB Feature Pack.
The AVB feature is supported on all platforms.
The ExtremeSwitching X590, X690, X870, X695, 5420, and 5520 series switches have the AVB Feature License included in the Advanced Edge or Base License. You do not need to separately purchase and install the AVB Feature License for these switches.
If you purchase the AVB Feature Pack license separately, use the enable license command to install it.
For more information about the AVB Feature Pack and licensing, see the ExtremeXOS 31.4 Feature License Requirements .
Note
The ExtremeSwitching X465 series switches support AVB on the front panel ports only, and only on the following VIMs (all ports):Note
For ExtremeSwitching 5420 series switches, Universal Ethernet ports U1 and U2 support AVB when stacking is disabled using the disable stacking-support command.Note
The ExtremeSwitching X590 and X690 series switches support AVB on all ports, except ports 25–36.Note
The ExtremeSwitching X440-G2 series switches support AVB, but AVB support on 48-port models is limited to ports on the front-panel ports 1–24 and 51–52.Note
In the 48-port models of ExtremeSwitching X440-G2 series switches, combo ports 51 and 52 do not support AVB when used as copper ports (as in RJ-45 interfaces.)Note
AVB is not supported on SummitStacks.Note
AVB is supported in ExtremeXOS 31.3 and later on the following X465 models: X465-24XE, X465-24S, and X465i-48W.Note
AVB is not supported when MACsec is enabled.Note
AVB is not supported when Network Timing Feature License is installed.