Within an
MA,
you configure the following MPs:
- Maintenance end points (MEPs), which are one of the following
types:
-
- UP MEPs—transmit CCMs and maintain CCM database
- DOWN MEPs—transmit CCMs and maintain CCM database
- Maintenance intermediate points (MIPs)—pass CCMs through
Each MEP must have an ID that is unique for that MEP throughout the
MA.
-
To configure UP and DOWN MEPs and its unique MEP ID, use
the following command:
configure
cfm domain domain_name
association
association_name [ports
port_list
add [[end-point [up|down] mepid {group
group_name}] | [intermediate-point]]
-
To change the MEP ID on an existing MEP, use the following
command:
configure
cfm domain domain-name association association_name ports port_list end-point [up | down] mepid mepid
-
To delete UP and DOWN MEPs, use the following
command:
configure
cfm domain domain-name
association
association_name
ports
port_list delete end-point [up | down] intermediate-point
-
To configure a MIP, use the following command:
configure
cfm domain domain_name
association
association_name [ports
port_list
add [[end-point [up|down] mepid {group
group_name}] | [intermediate-point]]
-
To delete a MIP, use the following command:
configure
cfm domain domain_name
association
association_name [ports
port_list
delete [[end-point [up|down] mepid {group
group_name}] | [intermediate-point]]
-
To configure the transmission interval for the MEP to send
CCMs, use the following command:
configure
cfm domain domain_name association association_name {ports port_list end-point [up | down]} transmit-interval [3|10|100|1000|10000|60000|600000]
-
To unconfigure the transmission interval for the MEP to
send CCMs and return it to the default, use the following command:
unconfigure
cfm domain domain_name association association_name {ports port_list end-point [up | down]} transmit-interval
-
To enable of disable a MEP, use the following
command:
configure
cfm domain domain_name association association_name ports port_list end-point [up | down] [enable | disable]
