Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow ipconfig ipv6
Description
Displays configuration information for one or more interfaces in the current VR context.
Syntax Description
| vlan_name | Specifies an IPv6 configured VLAN. |
| tunnel_name | Specifies an IPv6 tunnel. |
Default
N/A.
Usage Guidelines
- IPv6 address/netmask/etc.
- IPv6 forwarding information/IPv6 multicast forwarding information
Example
The following example displays configuration information on a VLAN "accounting":
# show ipconfig ipv6 accounting
Router Interface on accounting is enabled. MTU: 1500
IPv6 Hop Limit: 64
Locally registered unicast addresses:
2002::1/64 (Tentative)
fe80::204:96ff:fe1e:ec00%accounting/64 (Tentative)
Flags:
IPv6 Forwarding: NO Accept recvd RA: NO
Send redirects: YES Accept redirects: NO
The configuration settings for static route ping protection enable/disable, interval, and misses also appear:
# show ipconfig ipv6 Route Sharing : Enabled Route Compression : Enabled ICMP Redirect for Fast Path : Disabled Max Shared Gateways : Current: 16 Configured: 16 Route Sharing Hash : CRC Lower Ping Protection : Enabled for static routes Interval: 2 Misses: 3
History
This command was first available in ExtremeXOS 11.2.
This command changed to display information for the current VR context in ExtremeXOS 12.5.
The show output for max-gateways was added in ExtremeXOS 15.3.
Configuration settings for static route ping protection enable/disable, interval, and misses added in ExtremeXOS 16.1.3-Patch1-7.
Platform Availability
This command is available on the platforms listed for the IPv6 unicast routing feature.