Search

Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

show ipconfig

show ipconfig {ipv4} {vlan vlan_name}

Description

Displays configuration information for one or more VLANs in the current VR context.

Syntax Description

vlan_name Specifies a VLAN name.

Default

N/A.

Usage Guidelines

If no VLAN information is specified, then global IP configuration is displayed. Otherwise, specific VLAN information is displayed.

Example

# show ipconfig
       Use Redirects : Disabled
       IpOption LSRR : Enabled
       IpOption SSRR : Enabled
         IpOption RR : Enabled
         IpOption TS : Enabled
         IpOption RA : Enabled
       Route Sharing : Disabled
   Route Compression : Enabled
  Originated Packets : Don't require ipforwarding
  IP Fwding into LSP : Disabled
 Max Shared Gateways : Current: 4  Configured: 4
  Route Sharing Hash : CRC Lower
     Ping Protection : Enabled for static routes   Interval: 2   Misses: 3

      IRDP:
         Advertisement Address: 255.255.255.255      Maximum Interval: 600 
         Minimum Interval: 450     Lifetime: 1800  Preference: 0 

Interface    IP Address          Flags                   nSIA

Flags: (A) Address Mask Reply Enabled (B) BOOTP Enabled
       (b) Broadcast Forwarding Enabled
       (D) Duplicate address detected on VLAN, (E) Interface Enabled
       (f) Forwarding Enabled (g) Ignore IP Broadcast Enabled
       (h) Directed Broadcast Forwarding by Hardware Enabled
       (I) IRDP Advertisement Enabled, (M) Send Parameter Problem Enabled
       (m) Multicast forwarding Enabled, (n) Multinetted VLAN
       (nSIA ) Number of Secondary IP Addresses
       (P) Send Port Unreachables Enabled, (R) Send Redirects Enabled
       (r) Unicast Reverse Path Enabled on at least one port of the VLAN
       (t) Tentative address, (T) Time Stamp Reply Enabled
       (u) Send Unreachables Enabled, (U) Interface Up
       (v) VRRP Enabled, (X) Send Time Exceeded Enabled

History

This command was first available in ExtremeXOS 10.1.

The ipv4 keyword was added in ExtremeXOS 11.2.

This command changed to display information for the current VR context in ExtremeXOS 12.5.

Configuration settings for static route ping protection enable/disable, interval, and misses added in ExtremeXOS 16.1.3-Patch1-7.

Platform Availability

This command is available on all platforms.

Published June 29, 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page