show bfd neighbors dest-ip

Displays Bidirectional Forwarding Detection (BFD) neighbor information about destination devices.

Syntax

show bfd neighbors dest-ip { ip-address | ipv6-address } [ details ]

show bfd neighbors dest-ip { ip-address | ipv6-address } interface { ethernet slot/port | loopback number | port-channel number | ve ve-interface-number }

Parameters

ip-address: Specifies the IP address of the destination device.
ipv6-address: Specifies the IPv6 address of the destination device.
details: Displays detailed neighbor information about the destination device.
interface: Displays BFD neighbor interface information.
ethernet slot/port: Specifies an Ethernet slot and port.
loopback number: Specifies a loopback interface. Valid values range from 1 through 255.
port-channel number: Specifies a port-channel interface.
ve ve-interface-number: Specifies a virtual Ethernet (VE) interface.

Modes

Privileged EXEC mode

Output

The show bfd neighbors dest-ip command displays the following information:


Output field	Description
OurAddr	Specifies the source IP address of the interface on which this BFD session is running.
NeighAddr	The IPv4 or IPv6 address of the remote neighbor.
State	The current state of the BFD session: UP DOWN A.DOWN - The administrative down state. INIT - The initialization state. UNKNOWN - The current state is unknown.
Int	Specifies the interface on which the BFD session is running.

Examples

The following example shows sample output from the show bfd neighbors dest-ip command when the details keyword is used.

device# show bfd neighbors dest-ip 5.1.0.1 details
Flags: * indicates State is inconsistent across the cluster
OurAddr                                  NeighAddr                                State     Int
=======                                  =========                                =====     ===
5.1.0.2                                  5.1.0.1                                  UP        ve6

  Local    State: UP            Diag: 0              Demand mode: 0    Poll: 0
  Received State: UP            Diag: 0              Demand mode: 0    Poll: 0    Final: 1
  Local    MinTxInt(ms): 200    MinRxInt(ms): 200    Multiplier: 3
  Received MinTxInt(ms): 200    MinRxInt(ms): 200    Multiplier: 3
  Rx Count: 129722              Tx Count: 4
  LD/RD:          3/62          Heard from Remote: Y
  Current Registered Protocols: bgp
  Uptime: 0 day 5 hour 24 min 17 sec 424 msec