Displays details about Bidirectional Forwarding Detection (BFD) neighbors.
Privileged EXEC mode
The show bfd neighbors details command displays the following information:
| Output field | Description |
|---|---|
|
OurAddr |
Specifies the source IP address of the interface on which this BFD session is running. |
|
NeighAddr |
Specifies the IPv4 address of the remote neighbor. |
|
State |
Specifies the current state of the BFD session:
|
|
Int |
Specifies the interface on which the BFD session is running. |
|
Local: |
|
|
State |
State of the local device. |
|
Diag |
Value of the diagnostic field in the BFD control message as used by the device in the last message sent. |
|
Demand mode |
Value of the demand in the BFD control message as used by the device in the last message received. |
|
Poll |
Value of the poll in the BFD control message as used by the device in the last message sent or received. |
|
Received |
|
|
State |
State of the remote device. |
|
Diag |
Value of the diagnostic field in the BFD control message as used by the device in the last message received. |
|
Demand mode |
Value of the demand in the BFD control message as used by the device in the last message received. |
|
Poll |
Value of the poll in the BFD control message as used by the device in the last message received. |
|
Final |
Value of the final bit in the BFD control message as used by the device in the last message received. |
|
Local |
The local device |
|
MinTxInt(ms) |
The interval in milliseconds between which the device will send a BFD message from this local neighbor port to its peer. |
|
MinRxInt(ms) |
The interval in milliseconds that the neighbor device waits to receive a BFD message from its peer on this local port. |
|
Multiplier |
The number of times that the neighbor device will wait for the MinRxInterval time on this port before it determines that its peer device is nonoperational. |
|
Received |
Remote Device |
|
MinTxInt(ms) |
The interval in milliseconds between which the device will send a BFD message from the remote neighbor port to its peer. |
|
MinRxInt(ms) |
The interval in milliseconds that the neighbor device waits to receive a BFD message from its peer on this remote port. |
|
Multiplier |
The number of times that the remote neighbor device will wait for the MinRxInterval time on this port before it determines that its peer device is nonoperational. |
|
Rx Count |
Total number of BFD control messages received from the remote peer. |
|
Tx Count |
Total number of BFD control messages sent to the remote peer. |
|
LD/RD |
Local and remote discriminator. |
|
Heard from Remote |
Indicates the packets received from the BFD neighbor. |
|
Current Registered Protocols |
Specifies the protocols that are registered for the particular session. |
|
Uptime |
The amount of time the BFD session has been in the up state. |
device# show bfd neighbors details Flags: * indicates State is inconsistent across the cluster OurAddr NeighAddr State Int ======= ========= ===== === 121.5.0.1 121.5.0.2 UP ve256 Local State: UP Diag: 0 Demand mode: 0 Poll: 0 Received State: UP Diag: 0 Demand mode: 0 Poll: 0 Final: 0 Local MinTxInt(ms): 100 MinRxInt(ms): 100 Multiplier: 3 Received MinTxInt(ms): 100 MinRxInt(ms): 100 Multiplier: 3 Rx Count: 0 Tx Count: 0 LD/RD: 1/1 Heard from Remote: Y Current Registered Protocols: static-ip Uptime: 0 day 0 hour 15 min 31 sec 981 msec Session type : Hardware OurAddr NeighAddr State Int ======= ========= ===== === 121.6.0.1 121.6.0.2 UP ve257 Local State: UP Diag: 0 Demand mode: 0 Poll: 0 Received State: UP Diag: 0 Demand mode: 0 Poll: 0 Final: 0 Local MinTxInt(ms): 100 MinRxInt(ms): 100 Multiplier: 3 Received MinTxInt(ms): 100 MinRxInt(ms): 100 Multiplier: 3 Rx Count: 0 Tx Count: 0 LD/RD: 3/3 Heard from Remote: Y Current Registered Protocols: static-ip Uptime: 0 day 0 hour 15 min 31 sec 981 msec Session type : Software