show rmon

Displays the current RMON status on the device.

Syntax

show rmon [ alarms [ number ] [ brief ] | events [ number ] [ brief ] | logs [ event_number ] | statistics [ number ] [ brief ] ]

Parameters

alarms

Specifies to display the RMON alarm table.

number: Specifies the alarm index identification number. Valid values range from 1 through 65535.
brief: Specifies to display a brief summary of the output.

events

Specifies to display the RMON events table.

number: Specifies the event index identification number. Valid values range from 1 through 65535.
brief: Specifies to display a brief summary of the output.

logs

Specifies to display the RMON log table.

event_number: Specifies the event log index identification number. Valid values range from 1 through 65535.

statistics

Specifies to display the statistics identification number.

number: Specifies the statistics identification number. Valid values range from 1 through 65535.
brief: Specifies a brief summary of the output.

Modes

Privileged EXEC mode

Examples

To display the RMON statistics:

device# show rmon statistics
 
rmon collection index 4 
    Interface index is Id: 67108864 , Name : Ethernet 0/13
    Receive Statistics:
        218903 packets, 14015626 bytes,  0 packs dropped
        Multicasts: 218884, Broadcasts: 18
        Under-size : 0, Jabbers: 0, CRC: 0
        Fragments: 0, Collisions: 0
			 64 byte pkts: 218722, 65-127 byte pkts: 174
        128-255 byte pkts: 0, 256-511 byte pkts: 6
        512-1023 byte pkts: 0, 1024-1518 byte pkts: 0
        Over 1518-byte pkts(Oversize - Jumbo): 0
    Owner: RMON_SNMP
    Status: ok(1)

To display the RMON events:

device# show rmon events
 
event Index = 4 
        Description "My Description" 
        Event type Log & SnmpTrap 
        Event community name admin 
        Last Time Sent = 00:00:00 
        Owner  admin