Displays the default thresholds for environmental and alert values for small form-factor pluggable (SFP) types.
Privileged EXEC mode
You can modify these thresholds with the threshold-monitor sfp command.
The following example displays the default sfp thresholds for 1G SFP Copper.
device# show defaults threshold sfp type 1GCOP
Type: 1GCOP
+------------+-------------------------+-------------------------+--------+
| | High Threshold | Low Threshold | Buffer |
| Area | Value | Above | Below | Value | Below | Value |
| | | Action | Action | | Action | |
+------------+-------+--------+--------+-----------+-------------+--------+
| Temp C | 90 | raslog | none | -45| raslog | 0|
+------------+-------+--------+--------+-----------+-------------+--------+
| RXP uWatts | 501 | raslog | none | 6| raslog | 0|
+------------+-------+--------+--------+-----------+-------------+--------+
| TXP uWatts | 794 | raslog | none | 71| raslog | 0|
+------------+-------+--------+--------+-----------+-------------+--------+
| Current mA | 45 | raslog | none | 1| raslog | 0|
+------------+-------+--------+--------+-----------+-------------+--------+
| Voltage mV | 3700 | raslog | none | 2900| raslog | 0|
+------------+-------+--------+--------+-----------+-------------+--------+