clear policy-map-counters
Clears the policy map counters.
Syntax
clear policy-map-counters
[
control-plane
[
policy-map-name
]]|
[
interface
ethernet
slot/port
]
[
in
|
out
]
Parameters
-
control-plane
[
policy-map-name
]
- Clears the control-plane policy map counters. You can optionally enter the
name of the policy-map name.
-
interface
- Specifies an interface.
-
ethernet
- Represents a valid, physical
Ethernet type for all available Ethernet speeds.
- slot/port
- Specifies a slot and port
number.
- in
- Specifies clearing the
ingress counters.
- out
- Specifies clearing the egress
counters.
Modes
Privileged EXEC mode
Usage Guidelines
Use the clear
policy-map-counters command without any keyword options to clear all
of the policy map counters.
Examples
To clear the control-plane policy map counters, use the following command:
device# clear policy-map-counters control-plane
To clear the policy map counters
for a specific interface use the following command:
device# clear policy-map-counters interface ethernet 2/2
