Configuring a bypass LSP re-optimization timer

The user can configure a bypass LSP re-optimization timer on an adaptive bypass using the reoptimize-timer command.

To configure the re-optimization timer, complete the following steps.

Enable the device for configuration.
```
device>configure
```
Enable the MPLS router.
```
device(config)# router mpls
```
Configure the bypass LSP with the unique static bypass LSP name of my-bypass-lsp.
```
device(config-router-mpls)# bypass-lsp my-bypass-lsp
```
Configure the re-optimization timer. In this example, the timer is set to 400 seconds.
```
device(config-router-mpls-bypass-lsp-my-bypass-lsp)# reoptimize-timer  400
```

The following example combines the steps above to configure a static bypass LSP with a unique bypass LSP name of my-bypass-lsp and configures the re-optimization timer to 400 seconds.

device>configure
device(config)# router mpls
device(config-router-mpls)# bypass-lsp my-bypass-lsp
device(config-router-mpls-bypass-lsp-my-bypass-lsp)# reoptimize-timer  400