Configure the CSPF Computation Mode

1. Configure the device.
   

   device# configure

2. Enable the MPLS router.
   

   device(config)# router mpls

3. Set the cspf-computation mode under router mpls policy to use te-metric or igp-metric at the global level.
   

   device(config-router-mpls)# policy

4. Enable or disable cspf-computation mode to use te-metric or igp-metric locally at the LSP level for primary, secondary, and bypass LSPs .

   

   device(config-router-mpls-policy)# cspf-computation-mode metric-type use-igp-metric

The following example configures the CSPF computation mode on the device.

device# configure
device(config)# router mpls
device(config-router-mpls)# policy
device(config-router-mpls-policy)# cspf-computation-mode metric type use-igp-metric

Note

By default, all LSPs use global configuration.