Modifying a Path

Complete the following steps to delete a node from the sf_to_sj path defined in Setting up Paths

Configure the device
```
device# configure
```
Enable the MPLS router.
```
device#(config)# router mpls
```

Identify path.

device(config-router-mpls)# path sf_to_sj

Delete selected path.
```
device(config-router-mpls-path)# no hop 10.1.1.1
```
In this example, the path 10.1.1.1 is deleted.
Exit current level.
```
device(config-router- mpls-path)# exit
```

The following example deletes the hop 10.1.1.1.

device# configure
device#(config)# router mpls
device(config-router-mpls)# path sf_to_sj
device(config-router-mpls-path)# no hop 10.1.1.1
device(config-router-mpls-path)# exit