Install the Access Point Using the Main
Mounting Bracket and Easy-Attach Adapter
About this task
Use the flat metal easy-attach adapter (#37210) in combination with the main mounting
bracket (#37201) when you do not want to use the screw holes on the main mounting
bracket. The easy-attach adapter extends past the access point housing, thereby
making it convenient to easily attach and remove the access point from a flat
surface.
Procedure
Keep the adapter to the center
of the main mounting bracket, push and rotate it.
Flat metal easy-attach
adapter being attached to the main mounting bracket
Using the attachment holes on the easy-attach adapter, mark and drill two hole
centers on a wall or a solid flat ceiling.
Attach the easy-attach adapter to the wall using two Phillips pan-head
screws.
Use screw-in anchors, if needed.
Connect the Ethernet cable RJ45 connector into the GE1 port.
Place the access point onto the bracket feet and slide it down to lock it in
place.
