Specifications

This appendix lists the specifications for the ExtremeCloud™™ Indoor Access Point AP3912i.

Table 1. Specifications for the AP3912i
Item Specification
AP Part Number: 31025 WS-AP3912i-FCC
AP Part Number: 31026 WS-AP3912i-ROW
Enclosure material AP enclosure is not plenum rated.
Power source

Power is provided by Power-over-Ethernet (802.3at or 802.3af). No AC power supply is needed.

If wall plate has more than two Ethernet ports, the extra ports are not accessible after installing the Wall Plate AP.

Power consumption

802.3at or PoE 802.3af

Sensor radio power budget is 802.1af (12.5W)

Antenna Four single band internal antennas
Uplink interface One 10/100/1000BT Ethernet port
RoHS compliant Yes
Radio configuration

Dual Band Dual Concurrent 802.11ac and 802.11n

Radio 1: 5 GHz; 2x2:2; IEEE 802.11 ac (up to 886 Mbps per radio)

Radio 2: 2.4 GHz; 2x2:2; IEEE 802.11n (up to 300 Mbps per radio)

Legacy 802.11abg mode support

Integrated sensor radio that operates as Bluetooth 4.0 radio or operates as 802.15.4 (one at a time)

Water/dust proof ratings Not applicable
Operating temperature 0°C to 40°C
Non-operating transportation/storage -40°C to 70°C (-40°F to 158°F)
Altitude (feet) >6,500 feet; safety approved to 2,000 meters
Relative humidity (% RH) 0% to 95% (non-condensing)
Wind Not applicable. The AP3912i is an indoor-only model.