The AP3935 has two 10/100/1000BaseT RJ45 LAN ports (see AP3935 Bottom View) that can be attached directly to a 10/100/1000BaseT LAN segment. This segment must conform to the IEEE 802.3 or 802.3u specifications.
The APs appear as Ethernet nodes and perform a bridging function by moving packets from the wired LAN to remote workstations on the wireless infrastructure.
The LAN ports also support power over Ethernet 802.3at for full performance; (802.3af for low performance mode). Refer to Installation, for information on supplying power to the AP network port from a network device, such as a switch, that provides Power over Ethernet (PoE).