Mounting the AP using the Optional Mounting Bracket

About this task

When mounting the AP to a flat ceiling (or a wall), use the mounting bracket (30513, WS‐MBI‐WALL03) and two metal screws. Mounting sequence with mounting bracket shows an exploded view of the mounting bracket method:

Procedure

  1. The wall bracket provides four attachment holes. Using the bracket as a template, place the bracket and mark the drill holes.
  2. Hold the AP/bracket assembly so the drilled holes are in the center of the bracket holes.
  3. Insert and thread the screws so they support the bracket.
    Click to expand in new window
    Mounting sequence with mounting bracket
  4. Align the AP on the posts and slide down.
  5. Use a screw driver to attach the captive screw. Do NOT exceed 9 in‐lbs of torque.
  6. Use a Kensington lock for added security (see Kensington Lock slot). The Kensington lock, or an equivalent, must be used for all ceiling mounted applications of AP3935 with WS-MBI-WALL03.
9034915-03 Rev AA