Certifications of Other Countries

AP3935 access point has been certified for use in various other countries. Once the correct country code is selected, the Wireless AP automatically uses the proper frequencies and power outputs for that country code.

It is the responsibility of the end user to select the proper country code for the country within which the device will be operated, or run the risk violating local laws and regulations.

Other Country Specific Compliance Standards, Approvals and Declarations

IEC 60950‐1 CB Scheme + National Deviations
AS/NZS 60950.1 (Safety)
AS/NZS 3548 (Emissions via EU standards – ACMA)
AS/NZS 4288 (Radio via EU standards)
EN 300 328 (2.4 GHz)
EN 301 893 (5 GHz)
EN 301 489‐1 & ‐17 (RLAN)
IEEE 802.11ac (5 GHz)
IEEE 802.11b/g (2.4 GHz)
IEEE 802.11n
IEEE 802.3at (PoE)
IEEE 802.3af (PoE)

RF Safety Distance

The antennas used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and must not be co‐located or operating in conjunction with another antenna or transmitter.