TPVM Deployment Requirements

Complete the following prerequisites before you deploy a TPVM:

• Run the show tpvm status command on the SLX device to ensure that the TPVM is installed and running.
• Ensure that you specify the configuration of TPVM under the config mode.

The following example configures the NTP, IP, Timezone, Hostname, and DNS configurations:

SLX-1# show run tpvm
tpvm TPVM
   auto-boot
   ntp 10.20.53.134
   ntp 10.20.61.191
   dns primary-server 10.31.2.10 secondary-server 10.31.2.11 domain corp.extremenetworks.com
   hostname tpvm
   timezone America/Los\_Angeles
   interface management ip 10.20.246.101/20 gw 10.20.240.1
   deploy
!

For more information on supported commands on SLX-OS, see the Extreme SLX-OS Command Reference Guide.

For more information on TPVM deployment models, software support, IP fabric topology matrix, and XCO, neutron and SLX-OS compatibility, see Supported Platforms and Deployment Models for Fabric Skill