You can upgrade visibility manager
using interactive mode.
About this task
Follow this procedure to upgrade visibility manager in a
single-node XCO using a interactive mode on Server.
Procedure
-
Download the XCO tar file and
the digests file to the Linux server. Use an administrative account to install
XCO on this server.
admin@server$ ls
efa-3.3.0-digests.tar.gz efa-3.3.0.tar.gz
-
Verify the PGP signature as described in article 48172 on the Extreme Portal.
-
Extract the XCO tarball to a
desired location. Ensure that this location has the permissions to allow your
administrative user to run commands.
-
Change the current directory to
the extracted file location. Run the source deployment.sh
--deploy-suite packet command. This will start the XCO
installation in a menu-driven interactive mode.
For command line based
interactive mode, run the source deployment.sh
--deploy-suite packet -g no command.
-
When prompted, select Upgrade, Single-node
deployment, or Packet.
Tip
Use arrow keys
to move between options. Press the space bar to select an option.
text admin@server:~/efa$ source deployment.sh -g no Step 1:
Checking for EFA Stack...
Previous Stack found
Please choose: 1 Remove the current EFA Stack 2 Upgrade/Re-deploy 2 Please choose: 1 Single-node deployment 2 Multi-node deployment 1 Single-node Deployment`
-
When prompted, select the IP mode (IPv4 single stack, or Dual ip-stack). Then
select OK.
Tip
- Use arrow keys to move between options. Press the space bar to
select an option.
- Depending on the IP stack selection, system will prompt you with
appropriate IP address input.
-
When prompted to configure
additional management IP networks, take one of the following steps:
- Select No to
ignore this optional step or when you have finished entering
sub-interface information.
- Select Yes and
then provide the requested information
- Sub-interface
name, which is a unique name that contains no more than 11
characters, no white space, and no % or / characters.
- ID of the VLAN
that the management network uses to tag traffic. Valid values
range from 2 through 4093.
- IP subnet address
in CIDR format. The subnet must not overlap with any IP subnet
that you have already provided.
- An IPv6 address
is optional, but an IPv4 address is mandatory.
As the installation proceeds, messages display showing the installation
progress.
-
Verify the installation.
- From the EFA command line on the console or SSH session, run the
sudo efactl status command to see the status of
nodes, pods, and services.
- Run the efa status
command to ensure that status of all the nodes are up.
user@dev-server:/opt/efa/efa$ sudo efactl status
Node: efa
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
pod/efa-api-docs-jpppb 1/1 Running 0 28m 10.42.194.72 efa <none> <none>
pod/ui-service-4dggw 1/1 Running 0 28m 10.42.194.73 efa <none> <none>
pod/rabbitmq-tdq8q 1/1 Running 1 (27m ago) 28m 10.42.194.77 efa <none> <none>
pod/gosystem-service-wkbm9 1/1 Running 0 28m 10.42.194.75 efa <none> <none>
pod/gofaultmanager-service-n9c5s 1/1 Running 0 28m 10.42.194.74 efa <none> <none>
pod/gonotification-service-ljnb4 1/1 Running 0 28m 10.37.34.129 efa <none> <none>
pod/goinventory-service-2hk7t 1/1 Running 0 28m 10.42.194.69 efa <none> <none>
pod/gorbac-service-d6bxr 1/1 Running 0 28m 10.42.194.70 efa <none> <none>
pod/goauth-service-9n544 1/1 Running 0 28m 10.42.194.76 efa <none> <none>
pod/goevm-service-d45jl 1/1 Running 0 28m 10.42.194.71 efa <none> <none>
pod/goraslog-service-t6n6n 1/1 Running 0 28m 10.37.34.129 efa <none> <none>
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE SELECTOR
service/rabbitmq ClusterIP 10.43.136.36 <none> 15672/TCP,5672/TCP 28m app=rabbitmq
service/rabbitmq-local NodePort 10.43.115.197 <none> 15672:30673/TCP,5672:30672/TCP 28m app=rabbitmq
service/goinventory-service ClusterIP 10.43.194.233 <none> 8082/TCP 28m app=goinventory-service
service/efa-api-docs ClusterIP 10.43.160.75 <none> 80/TCP 28m app=efa-api-docs
service/goraslog-service ClusterIP 10.43.28.179 <none> 8091/TCP,54322/TCP 28m app=goraslog-service
service/gonotification-service ClusterIP 10.43.10.148 <none> 8088/TCP 28m app=gonotification-service
service/goauth-service ClusterIP 10.43.186.66 <none> 8080/TCP 28m app=goauth-service
service/gorbac-service ClusterIP 10.43.116.36 <none> 8089/TCP 28m app=gorbac-service
service/gofaultmanager-service ClusterIP 10.43.101.181 <none> 8094/TCP 28m app=gofaultmanager-service
service/gosystem-service ClusterIP 10.43.51.133 <none> 8090/TCP 28m app=gosystem-service
service/goevm-service ClusterIP 10.43.243.102 <none> 8101/TCP,8106/TCP 28m app=goevm-service
service/ui-service ClusterIP 10.43.158.199 <none> 3000/TCP 28m app=ui-service
NAME DESIRED CURRENT READY UP-TO-DATE AVAILABLE NODE SELECTOR AGE CONTAINERS IMAGES SELECTOR
daemonset.apps/efa-api-docs 1 1 1 1 1 <none> 28m efa-api-docs efa-api-docs:3.3.0 app=efa-api-docs
daemonset.apps/ui-service 1 1 1 1 1 <none> 28m ui ui:3.3.0 app=ui-service
daemonset.apps/rabbitmq 1 1 1 1 1 <none> 28m rabbitmq-node rabbitmq:3.3.0 app=rabbitmq
daemonset.apps/gosystem-service 1 1 1 1 1 <none> 28m gosystem gosystem:3.3.0 app=gosystem-service
daemonset.apps/gofaultmanager-service 1 1 1 1 1 <none> 28m gofaultmanager-service gofaultmanager:3.3.0 app=gofaultmanager-service
daemonset.apps/gonotification-service 1 1 1 1 1 <none> 28m gonotification-service gonotification:3.3.0 app=gonotification-service
daemonset.apps/goinventory-service 1 1 1 1 1 <none> 28m goinventory-service goinventory:3.3.0 app=goinventory-service
daemonset.apps/gorbac-service 1 1 1 1 1 <none> 28m go-rbac gorbac:3.3.0 app=gorbac-service
daemonset.apps/goauth-service 1 1 1 1 1 <none> 28m go-auth goauth:3.3.0 app=goauth-service
daemonset.apps/goevm-service 1 1 1 1 1 <none> 28m evm goevm:3.3.0 app=goevm-service
daemonset.apps/goraslog-service 1 1 1 1 1 <none> 28m goraslog-service goraslog:3.3.0 app=goraslog-service
