Convergence End Point (CEP) is a mechanism to detect remote IP telephony or video devices on a port and dynamically apply a policy based on the type of CEP device discovered. When a CEP device is detected on a port, the configured policy for that device is applied to the user on that port. The switch detects a CEP by inspecting devices on CDP- and LLDP-configured ports.
Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X870, X440-G2, X620 series switches.
configure policy convergence-endpoint [enable | disable]
configure policy convergence-endpoint ports [port_list | all] [cisco | lldp-med] [enable | disable]
configure policy convergence-endpoint clear ports [port_list | all]
configure policy convergence-endpoint index index [cisco | lldp-med]
unconfigure policy convergence-endpoint index [cisco | lldp-med]
show policy convergence-endpoint connections ports [port_list | all]
show policy convergence-endpoint
show policy convergence-endpoint ports [port_list | all]
unconfigure policy convergence-endpoint all