radio-actionsUse the radio-actions command to initiate an auto channel selection (ACS) for a selected radio. The radio-actions command is accessible from the ap context of the CLI.
| auto-ch | Initiates an ACS channel scan for the specified radios and APs. |
| radio1 | radio2 | Specifies the AP radio to be scanned. Scan each radio separately. |
| ap_serial | Identifies one or more APs to be scanned by serial number. |
The following example initiates ACS on radio 1 for the specified AP. The AP is identified by serial number.
EWC.extremenetworks.com:ap# radio-actions auto-ch radio1 1541D10030140001
Print
this page
Email this topic
Feedback
View PDF
Download EPUB