iot-ibeacon-uuidUse the iot-ibeacon-uuid command to configure the ibeacon UUID — Used to differentiate a large group of related beacons. A company can have a network of beacons with the same UUID. A smart phone app can identify the beacons coming from that company. The command is supported on the AP3912i and AP3916ic. The iot-ibeacon-uuid command is accessible from within the ap:<serial> context of the CLI.
| <uuid> | A 16-byte string used to differentiate a large group of related beacons. |
The IoT functionality is supported on the AP3912i and AP3916ic only. Enable iot-admin before issuing this command.
The following example sets the ibeacon UUID on an AP3916ic.
EWC.extremenetworks.com:ap:1254Y-3211230000#iot-ibeacon-uuid fadbfc46-f9a8-4454-b2ba-2e81a43d2a11
Print
this page
Email this topic
Feedback
View PDF
Download EPUB